Trigonox® V328 is a methyl ethyl ketone peroxide, in solvent mixture.

Trigonox® V388 is a general purpose methyl ethyl ketone peroxide (MEKP) for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures.

Trigonox® V388 VR is a general purpose methyl ethyl ketone peroxide (MEKP) with a VR system for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated. temperatures.

Perkadox® BC-FF may be used for the (co)polymerization of styrene in the temperature range of 110-165°C.

Perkadox® BTW-50 is the preferred BPO paste for unsaturated polyester & vinyl ester resins.

Perkadox® BC-40B-PD is a 40% formulation on an inert carrier system in powder form.

Perkadox® PF-MT40Z is a 40% suspension which is used for room temperature curing of acrylic solid surface without yellow discoloration. It is used in combination with Accelerator™ CTAS for room temperature cure.

Perkadox® GB-50L is a free-flowing 50% peroxide formulation on a phthalate-free carrier for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications.

Perkadox® GB-50X is a free-flowing 50% peroxide formulation on a phthalate-free carrier for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications.

Perkadox® PF-MT40 is a 40% suspension which is used for room temperature curing of acrylic solid surface without yellow discoloration. It is used in combination with Accelerator CTAS for room temperature cure.

Perkadox® L-W75 may be used for the polymerization of styrene in the temperature range of 80-100°C. Perkadox® L-W75 may also be used for the polymerization and copolymerization of (meth)acrylonitrile, vinylacetate, tetrafluoroethylene, divinylbenzene, para-methylstyrene and diallyl phthalate.

Controlled rheology polypropylene (CR-PP): High meltflow index polypropylene grades are produced by post reactor treatment. These high melt-flows are achieved by peroxide-initiated degradation during extrusion of the polypropylene. The advantage of this process is the high flexibility; the peroxide concentration controls the final viscosity. Coagent for flame retardant polystyrene: Polystyrene is made flame retardant by the use of halogen-containing additives such as hexabromocyclododecane (HBCD). Perkadox® 14S-FL can be used as a synergist in such systems thereby leading to a significant reduction in the amount of HBCD required.

Perkadox® 14-40B-PD is a 40% formulation on an inert carrier system in powder form.

Perkadox® 14-40B-GR-S is a 40% formulation on an inert carrier system in granular form

Perkadox® 16 is applied as an initiator for the suspension and mass polymerization of vinyl chloride in the temperature range between 40°C and 65°C.Perkadox® 16 can be used alone or in combination with other peroxides, such as 1,1,3,3-Tetramethylbutyl peroxyneodecanoate (Trigonox 423), Cumyl peroxyneodecanoate (Trigonox 99) or Dilauroyl peroxide (Laurox), to increase reactor efficiency.

GZKF series high temperature resistant vacuum joint base, the main body is made of 304 stainless steel, and equipped with high temperature resistant and corrosion resistant rubber gasket, excellent sealing effect. It can be used with GZKT-500, GZKT-510 and GZKT-550 high temperature resistant vacuum quick change joint.

The AVT series vacuum hose is used in the cold pumping process, and the unique joint seal can effectively prevent the vacuum leakage.

 AHVT series vacuum tube is a special hose for pressure vessel resistant to high temperature and high pressure. It consists of PTFE lined with metal woven mesh and externally supported by metal pipe. 

The GZKT series of high temperature resistant vacuum quick change joints are crafted with durable 304 stainless steel and feature internal components made from high temperature resistant and corrosion resistant materials. Designed to withstand extreme conditions, these joints incorporate advanced sealing rings—ranging from silicone rubber to fluorine-silicone composites—offering excellent temperature resistance up to 200℃ and enhanced durability. The GZKT-550 model further improves stability and longevity, making it ideal for demanding environments such as hot pressure tanks and curing furnaces.

Carbon Fiber Multiaxial Fabric

Carbon fiber multiaxial (non-crimp) fabrics with 0°, 90°, and ±45° layers for wind blades, marine, construction, and sports composites.