The D500Y vacuum bagging film is made of PE and PA through multi-layer co-extrusion blow molding. It has a clean appearance, good barrier performance and excellent tensile strength, making it not easy to be damaged. It is suitable for vacuum oven process.

D7400 vacuum bagging film is made of nylon. It has a clear and smooth appearance, good barrier performance, excellent tensile strength and good elongation performance. It can be used from room temperature to 392℉(200℃) in vacuum autoclave process or vacuum infusion molding process.

D1500 vacuum bagging film is made of modified nylon. It has good barrier performance, excellent tensile strength, good elongation performance and steady heat resistance. It can be used from room temperature to 446℉(230℃) in vacuum autoclave process. Recommended as a bagging film for advanced composi...

D600 vacuum bagging film is made of nylon. It has a clear appearance, good barrier performance and excellent tensile strength. It can be used from room temperature to 338℉(170℃) in vacuum autoclave process.

VBF400 vacuum bagging film is made of polyimide. It has good barrier performance, low elongation performance, High strength performance, Ultra high service temperature and good chemical resistant property. It can be used from room temperature to 752°F(400℃) in vacuum autoclave process.

VBF280 vacuum bagging film is made of modified PTFE. It has a clean, tidy and smooth appearance, good barrier performance, excellent tensile strength and good elongation performance. It has good chemical resistant property, using in cure process up to 599℉(315℃).

M3700 release film is a high elongation film which will exhibit excellent releaseproperties from vinyl ester and epoxy resin systems. It can undertake temperature upto 212°F (100℃).

M3900 release film is a high elongation film which will exhibit excellent release properties from vinyl ester and epoxy resin systems. It can undertake temperature up to 302°F (150℃).

M4000 release film is made of FEP. It has a clear and smooth appearance, excellent tensile strength, good elongation performance and excellent release characteristics. It is suitable for using with all commonly used resin systems. It can be used from room temperature to 500°F(260℃) in vacuum autocla...

MR400 release film is made of PI. It has low elongation performance, excellent tensile strength, Ultra high service temperature, and good chemical resistant property. It can be used from room temperature to 752°F(400℃) in vacuum autoclave process.

H100 sealant tape is designed for the pre-pumping process of composite material forming, with high strength and high toughness, can be repeatedly deformed at room temperature, can be used at the process temperature below 248°F (120°C), can be easily stripped from the mold after use, reducing the was...

H400 sealant tape is a high temperature sealant tape, this product has good temperature resistance, suitable for a variety of vacuum forming process. However, the initial viscosity of H400 is low, we should use H230 sealant tape at below 230℃ to insure the vacuum of the mold.

ZN350 is a glass fiber breather felt. It allows to breath air out from the vacuum bag and bleed excess of resin, is suitable for using from room temperature to 400 degrees Celsius.

ZN10-HT has uniform appearance and is free of impurities, and has pressure resistance and high temperature resistance. This product is suitable for a variety of preimmersion process, which can effectively absorb excess resin during the molding process, keep the air path unobstructed or be used for t...

PS100 is made of polyester yarn after washing and heat treatment. Peel plies strip off of cured laminates leaving a textured surface, reducing time spent hand finishing. Less time abrading in preparation for secondary bonding or painting. Highly drapable weave style can be applied over shaped parts ...

NS230 are peel plies, used to texture the surface of a composite laminate. Thepeel ply surface is helpful for secondary bonding or painting of the compositelaminate. Release ply fabrics may reduce or eliminate the need for sanding orabrading

GZKF series high temperature resistant vacuum joint base, the main body is made of 304 stainless steel, and equipped with high temperature resistant and corrosion resistant rubber gasket, excellent sealing effect. It can be used with GZKT-500, GZKT-510 and GZKT-550 high temperature resistant vacuum ...

The AVT series vacuum hose is used in the cold pumping process, and the unique joint seal can effectively prevent the vacuum leakage. AHVT series vacuum tube is a special hose for pressure vessel resistant to high temperature and high pressure. It consists of PTFE lined with metal woven mesh an...

The GZKT series of high temperature resistant vacuum quick change joints are crafted with durable 304 stainless steel and feature internal components made from high temperature resistant and corrosion resistant materials. Designed to withstand extreme conditions, these joints incorporate advanced se...