Anaerobic AdhesiveLOCTITE® 401™ is designed for the assembly of difficultto-bond materials which require uniform stress distribution and strong tension and/or shear strength. The product provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE® 401™ is...

Instant adhesiveLOCTITE® 406™ is designed for bonding of plastics and elastomeric materials where very fast fixturing is required.

Anaerobic SealantLOCTITE® 515™ is an anaerobic flange sealant that cures between close-fitting metal surfaces in the absence of air. It seals rigid metal joints, flexes with minor flange movements, and provides low-pressure resistance immediately after assembly. Ideal for pumps, thermostats, compres...

Threadlocker / anaerobic adhesiveLOCTITE® 573™ is an anaerobic sealant designed to seal close-fitting metal joints and flanges. It cures in the absence of air between rigid metal surfaces, forming a form-in-place gasket ideal for gearbox and engine casings. Its thixotropic nature minimizes migration...

Instant AdhesiveLOCTITE® 410™ is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock

Adhesive & SealantLOCTITE® EA 1C™ is a general purpose adhesive and sealant that bonds, seals, and repairs a wide variety of materials including metals, most plastics, and wood.

Epoxy ResinLOCTITE® EA 3473 is a fast curing, steel reinforced, two-part epoxy designed for making fast and curable repairs to a variety of metals.

Mold SealerLoctite® Frekote® B-15™ is formulated specifically as a sealer for composite and metal molds with micro porosity problems, small surface scratches or imperfections.

Solvent basedLOCTITE® MR 5923™ seals close fitting parts, machined surfaces and threaded connections in industrial, aircraft, and marine applications. 

Solventless methyl silicone resinBLUESIL RES 9522 A2 is a solventless methyl silicone resin which has been specially designed for mould release.

Mold release agentLOCTITE® FREKOTE 44-NC™ is a semi-permanent, non-migratory mold release agent.

Water-based release agentLOCTITE®FREKOTE R-110™ is a water-based release agent designed for rubber molding. 

Instant adhesiveLOCTITE® 638™ is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm and where maximum strength at room temperature is required.

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Polishing PasteIt is a super high cost performance polishing paste product for composite material products of FRP molds and product surface polishing products.

Polishing PasteIt is a super high cost performance polishing paste product for composite material products of FRP molds and product surface polishing products.

Super Release Wax Oxbond N8.0 Super Release Wax is a special wax mixture based on high-quality carnauba wax.

Unsaturated Polyester ResinZC-189 resin is an unsaturated polyester resin with phthalic anhydride, maleic anhydride and standard glycol as the main raw materials. It has been dissolved in styrene cross-linking monomer and has medium viscosity and medium reactivity.

A high production paste wax mold releaseOXBOND 102 is a high-temperature mold release paste wax based on refined carnauba wax blended with high-temperature synthetic ingredients. It is suitable for temperatures up to 120°C and for fiberglass products and artificial stone resin casting.

Demoulding waxOXBOND 333 is a demoulding wax containing synthetic wax and high-temperature resin. It forms a high-gloss hard surface on the mold, allows multiple demoldings, and is easy to apply and wipe off, for fiberglass and artificial stone molds.