Product Description

LOCTITE® 410™ takes the cyanoacrylate family in a different direction from fast, low-viscosity grades like LOCTITE® 401™ and 406™: it's a rubber-toughened formulation with a notably higher viscosity (1,700 to 5,000 mPa·s) and a black color, built to add flexibility, peel strength, and shock resistance rather than pure bonding speed. That combination makes it the choice when a joint needs to survive impact or vibration, not just hold static load, across metals, plastics, and rubbers. The trade-off is a longer fixture time than the faster grades in this range — 410™ performs best in thin bond gaps around 0.05 mm, and full chemical/solvent resistance still takes at least 24 hours to develop after initial fixturing.

Product Characteristics

How It's Used

Bond surfaces should be clean and free from grease. 410™ performs best in thin bond gaps around 0.05 mm — wider gaps slow the cure rate. Excess adhesive can be dissolved with LOCTITE® cleanup solvents, nitromethane, or acetone.

LOCTITE® 410™ is not recommended for pure oxygen or oxygen-rich systems, or as a sealant against chlorine or other strong oxidizers.

Storage

Store in the original, unopened container in a dry location. Optimal storage is 2°C to 8°C — storage below 2°C or above 8°C can affect product properties. Material removed from the container should not be returned to it once it may have been contaminated during use.

Safety

This page summarizes performance data only. Consult the Safety Data Sheet (SDS) for full handling, storage, and safety information before use.

LOCTITE® is a trademark of Henkel Corporation in the U.S. and elsewhere.