HAPs Free

High thermal stabilit

Easy to apply

Reduces labor time and costs

1. Mold surface must be thoroughly cleaned to remove all traces of wax, release agents, and other sealers.

2. Surface should be dry and free of contaminants.

3. Saturate a clean cotton cloth (not dripping) and wipe on a smooth continuous film. Apply no more than a few square feet at a time.

4. When the film begins to evaporate at the edge, wipe the surface with a second clean dry cotton cloth. Use a circular motion from the outside, working inwards until film is left dry and clear. See Notes

5. Repeat above procedures until entire mold surface has been covered.
   

6. Apply 4-5 coats, allowing 15minutes between each coat.
   

7. Allow 30 minutes for full cure. Proceed with production.

   
   

   

   Cooperating Suppliers

   We cooperate with multiple well-known domestic suppliers

   

   Certificate Display

   Our products have passed various industry certifications