Solvent basedLOCTITE® MR 5923™ seals close fitting parts, machined surfaces and threaded connections in industrial, aircraft, and marine applications. 

PMMA additive intended with outstanding resistance to thermal degradation and hydrolysis for SMC / BMCPalapreg® H 856-902 is a PMMA type of low profile (LP) additive intended for SMC/BMC. It is specially used for BMC lamp reflector and SMC/BMC products requiring water resistance.

2-piperazin-1-ylethanamineCAS number 140-31-8Diethylenetriamine (DETA) is an aliphatic ethylene amine with two primary and one secondary amine groups. DETA is a clear, colorless liquid. Typical application areas of DETA include chelating agents, wet-strength resins, lubricant oil additives, oil fiel...

Synthetic polymerPolyvinyl Alcohol BP-26 (PVA BP-26) is a water-soluble, biodegradable synthetic polymer with excellent film-forming and adhesion properties. It is widely used as a warp sizing agent in textiles, a protective colloid in emulsion polymerization, and a key material for paper adhesives....

Rutile titanium dioxide pigmentSR-2377 is a rutile titanium dioxide pigment with advanced zirconia and alumina surface treatment. It delivers high whiteness, excellent gloss, and strong tinting strength for demanding applications. The product also provides outstanding durability and dispersion perfo...

Solventless methyl silicone resinBLUESIL RES 9522 A2 is a solventless methyl silicone resin which has been specially designed for mould release.

Mold release agentLOCTITE® FREKOTE 44-NC™ is a semi-permanent, non-migratory mold release agent.

Water-based release agentLOCTITE®FREKOTE R-110™ is a water-based release agent designed for rubber molding. 

Instant adhesiveLOCTITE® 638™ is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm and where maximum strength at room temperature is required.

tert-Butyl peroxy-2-ethylhexanoateCAS number 3006-82-4Trigonox® 21S (tert-Butyl peroxy-2-ethylhexanoate) can be used for the market segments: polymer production, thermoset composites and acrylics with their different applications/functions.

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Gel CoatMAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties. MAXGUARD GN // H/S premium gelcoat surfaces are hard, glossy and tough and they are hi...

Dispersing agentMorwet® D-400 Powder is a sodium alkyl naphthalene sulfonate condensate (NSC), it is a cost effective version of Morwet® D-425

ZN350 is a glass fiber breather felt. It allows to breath air out from the vacuum bag and bleed excess of resin, is suitable for using from room temperature to 400 degrees Celsius.

Gel CoatMAXGUARDTM GT tooling gelcoats are based on epoxy modified vinyl ester. The base resin and the
formulations give good mechanical properties, good gloss and flexibility to final products. Also, the chemical
resistance is very good which is needed for polyester molds. Available colors...

Gel CoatMaxguard™ NP 189016 SC WHITE is a premium gelcoat incorporating low styrene emission technology. It provides the finished product with excellent chemical esistance and ageing resistance.