Nouryon has a rich history dating back over 400 years and has built a strong reputation for its innovative and sustainable chemical products.
EVERGREEN Chemicals has been officially authorized by Nouryon to sell their series of products since 2013. The partnership between Nouryon and EVERGREEN Chemicals reflects a friendly and cooperative relationship between the two companies.
Over the years, EVERGREEN Chemicals has successfully developed and grown to become one of the largest dealers of Nouryon's products in Mainland China. This accomplishment demonstrates the trust and confidence that Nouryon has placed in EVERGREEN Chemicals as a reliable partner for distributing their products in the region.
As an authorized dealer, EVERGREEN Chemicals is responsible for promoting and selling Nouryon's products, ensuring their availability and accessibility to customers in Mainland China. This collaboration allows EVERGREEN Chemicals to leverage Nouryon's product portfolio, expertise, and resources to provide their customers with high-quality products and solutions.
If you are interested in Nouryon's products and wish to obtain further information or make a purchase, EVERGREEN Chemicals would be a trusted and reliable partner to assist you. They can provide guidance, technical support, and tailored solutions based on their extensive experience and knowledge of Nouryon's product range.
It is always advisable to contact EVERGREEN Chemicals directly for the most up-to-date information on the specific Nouryon products they offer and the services they provide.
NOURYON
Product | Chemical short name | Cas | Common Application |
AEP | 140-31-8 | It is used as an intermediate in the fabrication of detergents, fabric softeners, chelates, fuel additives and coatings. | |
BA1210 | 84238-53-9,68910-05-4 | BA-1210 is used as an intermediate in the manufacture of asphalt additives and epoxy curing agent. | |
MEKP | 1338-23-4 | Normal FRP catalyst | |
| MEKP | 1338-23-4 | MEKP without DMP | |
MEKP | 1338-23-4 | Decolorable MEKP | |
| BUTANOX M-60 | MEKP | 1338-23-4 | Butanox M-50 upgraded version |
MEKP | 1338-23-4 | Special catalyst for vinyl resin | |
MEKP | 1338-23-4 | Peroxide MEKP | |
DETA | 111-40-0 | It can be used directly as hardener or as building-block for Polyamidoamines. | |
EDTA-Na₄ | 64-02-8 | Dissolvine® Na is a versatile sequestering agent, forming stable, water-soluble chelates with polyvalent metal ions in a wide pH range. | |
Hydroxyethylethylenediamine | HEEDA | 111-42-2 | It is used as an intermediate in the fabrication of detergents, fabric softeners, chelates, fuel additives and coatings. |
Hexa-eight piperazine | 68 piperazine | - | Substances used in the treatment or control of nematode infestations. They are used also in veterinary practice. |
KB EC 300-J | 1333-86-4 | Used for for anti -electricity and conductive applications | |
KB EC 600-JD | 1333-86-4 | Used for for anti -electricity and conductive applications | |
DLP | 105-74-8 | Widely used initiator ,used in suspension and mass polymerization of vinyI chloride between 60°C and 80°C. | |
| Morwet D-400 | ANS | - | Morwet® D-400 is an anionic wetting and dispersing agent used mainly in water-based systems. It improves the dispersion of pigments and fillers, enhances wetting, prevents settling, and increases the stability of the formulation. |
MEKP | 1338-23-4 | Particularly for curing of pultruded FRP roof | |
MEKP | 1338-23-4 | Normal FRP catalyst | |
MEKP | 1338-23-4 | Trigonox® V388 VR is general purpose methyl ethyl ketone peroxide (MEKP) for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures. | |
DTBP | 110-05-4 | Crosslinking agent, vulcanizing agent DTBP | |
TBPB | 614-45-9 | Medium and high temperature catalyst | |
TBPEH | 3006-82-4 | Initiator for the production of low-density polyethylene | |
DTBCH | 3006-86-8 | (Co)polymerization of styrene, acrylonitrile, acrylates and methacrylates in the temperature range between 95°C and 125°C | |
TBPN | 26748-41-4 | An effective initiator for the production of low-density polyethylene can be used in both the tubular process and the autoclave. In many cases, Trigonox 23-C75 is usually used in combination with other peroxides to achieve a wider polymerization temperature range. | |
TBPP | 927-07-1 | Initiator for the polymerization and copolymerization of ethylene, vinyl chloride, vinylidene chloride, acrylate and methacrylic acid. | |
TBPB | 6731-36-8 | SMC&BMC process to extend storage time. | |
TBPB | 6731-36-8 | Trigonox® 29-40B-PD is a bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. | |
DTMP | 3851-87-4 | Trigonox® 36-C75 is an efficient initiator for the ethylene polymerization under high pressure in both autoclave and tubular processes. To obtain a wide spectrum of polymerization temperatures, combinations with other peroxides are applied in practice. | |
TBPIN | 13122-18-4 | Used for the market segments: polymer production, thermoset composites and acrylics with their different applications/functions. | |
| Trigonox 93 | DTBP | 614-45-9 | Application area for the cure system Trigonox® 93 plus a cobalt accelerator can be e.g. artificial marble, polymer concrete, filament winding and air drying lacquers. |
| Trigonox 99-C75 | CPN | 26748-47-0 | Trigonox® 99-C75 is an efficient initiator for the production of Low Density Polyethylene (LDPE). It is used both for tubular and autoclave processes. In most cases a combination with other peroxides is used to ensure a broad reactivity range. |
BPDH | 78-63-7 | An effective peroxide for the production of controlled rheological polypropylene (CR-PP). It allows polypropylene producers to have great flexibility in controlling the melt flow index (MFI) of the polymer. | |
BPDH | 78-63-7 | Used for the crosslinking of natural and synthetic rubbers, as well as thermoplastic polyolefins. Rubber compounds containing Trigonox® 101-45B-PD have excellent scorch safety. | |
BPDH | 78-63-7 | Used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. Rubber compounds containing Trigonox® 101-45D-PD have excellent scorch safety, and under certain conditions one step mixing is possible. Safe processing temperature: 135°C (rheometer ts2 > 20 min.).Typical crosslinking temperature: 175°C (rheometer t90 about 12 min.). | |
BPDH | 78-63-7 | Used for the crosslinking of silicone rubber. Safe processing temperature: 135°C (rheometer ts2 > 20 min.). Typical crosslinking temperature: 175°C (rheometer t90 about 12 min.) | |
BPDH | 78-63-7 | Trigonox® 101-50D-PD is a 50% formulation on an inert carrier sytem in powder form. | |
DEHPC | 16111-62-9 | Trigonox® EHP-W60 is an initiator, consisting of a 60% emulsion in water and methanol, used for the (co)polymerization of vinyl chloride and vinylidene chloride. | |
TBHP | 75-91-2 | Styrene, acrylonitrile, vinyl chloride, methacrylate polymerization | |
| TRIGONOX BPIC-C75 | TBIC | 2372-21-6 | Initiator: used for the polymerization of ethylene, styrene, acrylonitrile, acrylate and methacrylate. |
CHP | 80-15-9 | Large parts and filament winding | |
CHP | 80-15-9 | Various polymerization reactions, including emulsion and solution polymerization | |
TBEC | 34443-12-4 | Used for the market segments: polymer production, polymer crosslinking, thermoset composites and acrylics with their different applications/functions. | |
TAPEH | 686-31-7 | Polymerization of (meth)acrylates，unsaturated polyester resins at high temperatures catalyst，BMC and DMC. | |
TAPP | 29240-17-3 | Trigonox® 125-C70 is an efficient initiator for the ethylene polymerization under high pressure in both autoclave and tubular processes. To obtain a wide spectrum of polymerization temperatures, combinations with other peroxides are applied in practice. | |
MIBKP | 37206-20-5 | Filament winding and production of flat and corrugated boards | |
DTAC | 15667-10-4 | Polymerization of styrene,ethylene,acrylonitrile, acrylates and methacrylates, BMC, TMC, SMC and pultrusion process. | |
DEHCH | 13052-09-0 | Used for the market segments: polymer production and thermoset composites with their different applications/functions. | |
DYBP | 1068-27-5 | Trigonox® 145-45B-PD is a bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. | |
DYBP | 1068-27-5 | used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. Safe processing temperature: 145°C (rheometer ts2 > 20 min.). Typical crosslinking temperature: 185°C (rheometer t90 about 12 min.). | |
MEKP/CHP | 1338-23-4, 80-15-9 | Trigonox® 249 is a peroxide blend specially developed for curing unsaturated polyester and vinylester resins at ambient conditions in conjunction with a metal salt. Trigonox® 249 can also be solely applied for the curing of UP resins at elevated temperatures. Trigonox® 249 produces lower exotherms than standard MEKP’s and is useful in warm and hot weather climates. Applications include cast polymer and laminates. | |
MEKP/CHP | 1338-23-4, 80-15-9 | Trigonox® 249 VR is a special peroxide blend with a VR system, suitable for curing unsaturated polyester and vinylester resins at ambient conditions in conjunction with a metal accelerator. | |
DTBP | 614-45-9, 37187-22-7 | Trigonox® 279 has specially been developed for the cure of unsaturated polyester resins at elevated temperatures in combination with a cobalt accelerator (e.g. Accelerator NL-49 PN = 1% cobalt). Application area for the cure system Trigonox® 279 plus a cobalt accelerator can be e.g. continuous laminating, resin transfer moulding, filament winding and centrifugal casting. | |
MEKP/CHP mixture | 1338-23-4; 80-15-9 | Convenient initiator suitable for curing unsaturated polyester, vinyl ester and acrylic thermosetting resins at ambient conditions in conjunction with a metal salt | |
DTBP | 24748-23-0 | Used for the market segments: polymer production and acrylics production with their different applications/functions. | |
DTBP | 24748-23-0 | Used for the market segments: polymer production and acrylics production with their different applications/functions. | |
BIBP | 25155-25-3, 2212-81-9 | Bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. | |
BIPB | 2212-81-9, 25155-25-3 | Used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. Rubber compounds containing Perkadox® 14-40B-PD have excellent scorch safety, and under certain conditions one step mixing is possible. Safe processing temperature: 135°C (rheometer ts2 > 20 min.). Typical crosslinking temperature: 175°C (rheometer t90 about 12 min.) | |
BIPB | 2212-81-9, 25155-25-3 | Perkadox® 14-40B-GR-S is a bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. | |
BCHPC | 239-557-1 | Dentures, spectacle lenses, trenchless pipes, chlorine Suspension and body combination of ethylene | |
DCP | 80-43-3 | Used for rubber (natural rubber, synthetic rubber), polyolefin crosslinking. | |
DCP | 80-43-3 | Used for rubber (natural rubber, synthetic rubber), polyolefin crosslinking. | |
BPO | 94-36-0 | PERKADOX BM-50 upgrade version | |
| PERKADOX GB-50L | BPO | 94-36-0 | for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications. |
BPO | 94-36-0 | for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications | |
BPO | 94-36-0 | 75% BPO powder | |
DCBP | 133-14-2 | Used for the crosslinking of silicone rubber | |
BPMO | 1931-62-0 | Used as for the ambient temperature curing of MMA resins | |
BPMO | 1931-62-0 | Perkadox® PF-MT40Z can be used as for the ambient temperature curing of MMA resins. |
